- No products in the cart.
BEST SELLING PRODUCTS
Investors rushed into funds that buy US loans over the past week, hoping to profit from higher interest rates as the Federal Reserve readies to tighten monetary policy to combat inflation.
Funds invested in US loans pulled in $1.9bn in the week to Wednesday, the largest weekly addition to the asset class in five years, according to flows tracked by data provider EPFR.
The push into the loan market came as the US central bank prepares to withdraw pandemic stimulus measures and lift interest rates for the first time since December 2018. Minutes from the Federal Open Market Committee meeting in December showed that policymakers may raise interest rates more swiftly than had previously been expected.
Traders are betting the Fed will lift rates between three and four times this year to about 1 per cent, according to futures markets. That view in US financial markets has been reinforced by data showing rising employment and soaring consumer prices, cementing investors’ expectations of a hawkish shift from the central bank.
“I think we may have reached the inflection point. The question is no longer ‘if’ rates will go higher, but ‘how soon and by how much’,” said Jeff Bakalar, group head of leveraged credit at Voya Investment Management. “Every time this has happened, the loan market has become a safe harbour.”
Loans are seen as better insulated from a Fed’s policy shift than corporate bonds because the coupon paid to investors rises and falls with benchmark interest rates. Interest on corporate bonds, by contrast, is fixed and does not change over time. That means that as interest rates rise, so do the returns from loans that flow back to investors, while bond prices tend to fall.
The total return on a widely watched index of US leveraged loans run by the Loan Syndications and Trading Association is up 0.5 per cent this year, pushing the average price on the loans up to 99 cents on the dollar, its highest level in more than seven years.
Those returns have eclipsed the performance of the benchmark S&P 500 stock index, which is down more than 2 per cent, and high yield corporate bonds, which have lost 0.6 per cent this year, according to Ice Data Services.
Recent volatility in financial markets, where investors have retooled portfolios to adjust for higher interest rates, has weighed on corporate bond funds. Funds that buy high-yield bonds suffered redemptions of $1.6bn over the past week, the first outflows since the start of December.
“Loans provide two much-needed characteristics for investors in 2022 — rate protection and relatively stable performance,” Citi analysts Michael Anderson and Philip Dobrinov wrote in a report. “If the first week of 2022 is a harbinger of persisting volatility, loans should be a compelling investment.”
Investors have shown less interest in one corner of financial markets that has benefited from rising consumer prices over the past year: inflows into inflation-linked bond funds have dropped. The funds counted about $40m of inflows, down from $1.1bn the previous week.
The modest addition indicated that in spite of the hefty rise in December consumer price inflation reported this week, investors have confidence in the Fed’s pledge to tighten monetary policy and curb inflation.
“The Fed appears more sensitive to realised inflation prints than it has been in the past and stronger prints appear to be leading to expectations of more hawkish policy,” Barclays analysts Michael Pond and Jonathan Hill wrote in a note to clients. “If seen as credible and effective, talk of tighter monetary policy should lead to lower forward inflation expectations.”
Robert Armstrong dissects the most important market trends and discusses how Wall Street’s best minds respond to them. Sign up here to get the newsletter sent straight to your inbox every weekday
Sometime in the spring of 2020, Sam O’Leary’s phone began ringing off the hook.
The callers were managers from the auto and aerospace industries. They were all seeking help from his industrial 3D printing business in Germany, SLM, in producing vital parts that were suddenly becoming scarce as the Covid-19 pandemic disrupted international shipping.
“I didn’t do a single day away from the office,” says O’Leary, who took to showing off the company’s specialised machines to clients over video calls. His customers’ worries were always the same, he says: “I’ve got a massive problem, I need to de-risk, I need to reshore.”
SLM’s customers had hitherto used its technology for niche applications, such as producing gooseneck brackets for planes and brake callipers for performance vehicles.
But, despite the increased cost and complexity of 3D printing metal components, they turned to the technology for more commonplace parts — such as hinges that keep regular car seats in place.
So, while many other industrial businesses saw their order intake slow to a standstill, revenues at the Lübeck-based company — whose shares had fallen to record lows before the pandemic hit — grew by more than a quarter in 2020.
Sales were on track to have increased by a similar amount in 2021. For 2022, O’Leary expects SLM’s sales to grow by 40 per cent.
High-profile disruptions to global supply chains in the past couple of years — including the temporary blockage of the Suez Canal, floods and fires in Texas and Japan, as well as ongoing semiconductor production bottlenecks — have led to similarly rosy forecasts for the rest of the so-called “additive manufacturing” sector.
Last year, a study by Lux Research estimated that the market for 3D printed parts, which was worth $12bn in 2020, would grow to well over $50bn by the end of the decade.
Governments across the world have sought to address how, and where, components are made. In Germany, the recent chronic shortage of semiconductors led to millions fewer cars being produced than customers wanted to order. As a result, it is one of many countries to have pledged to support the “reshoring” of crucial component manufacturing to protect their economies.
But, despite such enthusiasm, evidence increasingly points to the fact that businesses like SLM are serving a small market.
A survey of European companies conducted by EY in the early spring lockdowns of 2020 found that more than four-fifths were considering bringing their supply chains closer to home. When the same survey was conducted in April last year, however, that view was shared by just 20 per cent of respondents.
Similarly, only 15 per cent of the multinational companies surveyed by the Association of German Chambers of Industry and Commerce (DIHK) said they would relocate production.
Their stance was echoed by sports goods group Adidas. Just five years ago, the company launched a scheme to build factories in Germany and the US that would use local materials and advanced manufacturing techniques, such as 3D printing, to produce bespoke trainers for nearby customers.
It had to all but abandon this plan as the Covid-19 pandemic began. But, after supply chain disruptions cut Adidas’ revenue growth by around €600 million in the three months to the end of September 2021, boss Kasper Rorsted was adamant that he had not changed his view on reshoring manufacturing.
“We have approximately 800,000 people deployed in our [suppliers’] factories,” he said in November. “It is an illusion to believe that you can move an industry that has grown over 30 years in Asia, to a very sophisticated industry, to some regions.”
Even if that was theoretically possible, Rorsted added, raw materials would still need to be sourced from around the world to produce the parts, making the prospect of reshoring a “total illusion”.
“You wouldn’t even be able to find the people [that would need to do the work currently being done in Asia],” he said.
Economists in Germany are also unconvinced.
“If the EU were to decouple even partially from international supply networks, this would considerably worsen the standard of living for people inside the EU as well as for its trading partners, and should thus be avoided by all means,” warns Alexander Sandkamp. He is one of the authors of a study by the Kiel Institute for the World Economy that suggested that regionalising production would cost Europe hundreds of billions of euros.
The recent flood disasters in Germany, which cost the country €40bn, according to insurance group Munich Re, was further proof that “shocks can also occur on our doorstep,” Sandkamp adds.
Even SLM’s O’Leary is quick to add a caveat to his company’s bullish forecast.
“We work primarily with regulated industries,” he says. “So, if you’re in an aerospace supply chain . . . you don’t just buy a 3D printer and say: ‘OK, well, I’ve decided to move away from my supplier wherever [they are] in the world and I’m going to do this in-house’.”
A recent development programme with a major UK aero-engine manufacturer, he adds, took two years to get up and running, due to the time needed to install the necessary machines on-site and get the necessary approvals from Britain’s Civil Aviation Authority.
“The demand is definitely increasing,” says O’Leary. “But there’s also a reality in that this is a technology and a change that is regulated and takes time.”
Additional reporting by Olaf Storbeck
In October last year, Volvo Group unveiled the world’s first vehicle made using “green” steel. The autonomous electric truck weighed eight tonnes and was designed for use in quarries and mines.
It was the result of an industrial partnership between Swedish steelmaker SSAB, the state-owned electricity generator Vattenfall, and iron-ore miner LKAB. Their aim was to make the first steel free of fossil fuel by replacing the coking coal traditionally used in its manufacture with green hydrogen.
The partnership, dubbed “Hybrit”, is at the cutting-edge of European industry efforts to develop more energy-efficient, low-carbon manufacturing techniques.
Many initiatives were already under way before the coronavirus hit, but the pandemic has focused industrial leaders’ minds on the importance of reshaping and strengthening supply chains, and coping with longer-term challenges — in particular, climate change.
“It is no longer about the lowest cost producer, it is about resilience in your supply chain,” says Stephen Phipson, chief executive of British trade body, Make UK.
Manufacturing executives in the UK, he points out, are re-evaluating ‘just-in-time’ manufacturing processes and how much inventory to hold in future to ensure greater resilience. The importance of skills has also moved up the agenda, especially as companies battle to attract and maintain workers after the pandemic, which has left many short of staff.
But business leaders caution that wholesale transformation will not happen overnight.
A survey by McKinsey last November underlined the challenges. In a previous survey, in May 2020, most companies stated that they planned to pursue several paths to improve supply-chain resilience, including diversifying supply bases. But, in practice, by the end of 2021, most had mainly increased their inventories.
The more recent survey found that 61 per cent of companies had increased inventory of critical products and 55 per cent had taken action to ensure they had at least two sources of raw materials. Only 11 per cent had “nearshored” production, to avoid the risks of disruption from geographically remote suppliers.
Duncan Johnston, UK manufacturing leader at Deloitte, says: “Changing things in manufacturing takes time. You can’t change what was a global supply chain into something that is more near-shored or UK-centric very quickly”.
Where climate change meets business, markets and politics. Explore the FT’s coverage here.
Are you curious about the FT’s environmental sustainability commitments? Find out more about our science-based targets here
The same, he says, is true of sustainability ambitions. While companies have done some thinking about it, they have not yet “really embarked on the substantial journey that is needed to reduce carbon emissions in the UK economy”.
Manufacturers face several challenges along the way. Apart from reducing the emissions in their own processes, they need to consider those in their supply chain. They need to find new ways to power their activities and, in some cases, such as the automotive sector, completely re-engineer their products.
Heavy manufacturing industries, such as steel and cement, are among those at the forefront of efforts to decarbonise countries’ economies. Outside of power generation, the iron and steel sector is the largest industrial producer of carbon dioxide. It accounts for 7 per cent-9 per cent of all direct fossil fuel emissions, according to the World Steel Association.
To meet global climate and energy goals, the steel industry’s emissions must fall by at least half by the middle of the century, according to the International Energy Agency. Achieving such a reduction will require more than incremental improvements in the efficiency of traditional blast furnaces.
“We have come to a point where, in terms of efficiency improvement efforts, there is not much more room left,” says Martin Pei, chief technical officer at SSAB. “It is really breakthrough technology that we are looking at now.”
In the blast furnace process, companies use carbon to take oxygen from iron ore to get iron. SSAB will instead use clean hydrogen gas, produced in a facility called an electrolyser powered by Sweden’s abundant renewable electricity. The output will be a solid intermediate, called sponge iron, which goes into an electric arc furnace, where it is mixed with scrap and refined into steel.
The successful production of Volvo’s first heavy-duty truck shows that the “whole value chain works,” says Pei.
SSAB has estimated that metal from its hydrogen-based process will, at least initially, be 20-30 per cent more expensive than conventional production. Pei, however, says that customers are keen and that demand for greener steel is growing as more and more companies commit to decarbonising their supply chains.
Policymakers will need to play their part, too, in helping manufacturers transition to a low-carbon economy. For Europe’s steel industry to switch en masse to hydrogen, for example, would require a massive expansion of renewable power. State support would be needed to fund the necessary investment in expanding power grids and other infrastructure to accommodate the transformation to low-carbon economies.
Hydrogen is a prime example. The EU and the UK have both published ambitious plans to develop a hydrogen economy but obstacles remain to making this a commercial reality.
For example, says Phipson, the UK has a “very small innovative sector on hydrogen . . . the challenge is to scale that up”. Britain, he adds, is very good on innovation and research funding but what is needed is “scale-up capital”.
As for funding sources, he says: “There is a big commitment from companies to use private capital but the government also needs to play its part.”
Transforming the workforce to deal with this transition is another concern. Even before the pandemic, manufacturers were worried about the effects of an ageing workforce and how to attract younger talent with more digital skills.
“We don’t know any manufacturing business that has as much in the way of digital skills as they would like,” says Johnston.
Those worries have grown, with many employers emerging from the pandemic with even more unfilled jobs. Phipson wants to see more action from the government on this front, as well.
“[It] needs to get more ambitious about its skills,” he believes. At the moment, the skills shortage is a “drag on growth”.
Ayatollah Ruhollah Khomeini once said the purpose of the 1979 revolution in Iran was to promote Islam, not the economy. Focusing on the latter would reduce human beings to animals, according to the founder of the Islamic republic.
More than four decades later, the regime’s ideology and hostility to the US remain intact but the economy is very much at the forefront of leaders’ minds. New president Ebrahim Raisi has sought to assure Iranians that his priorities were tackling economic woes and boosting their welfare.
The solution has been adopting a “resistance economy” against sanctions imposed by Washington, which accuses Tehran of developing the atomic bomb and fomenting terror operations in the Middle East. Iran can foil hundreds of US punitive measures by focusing on its domestic market; curbing its reliance on imports; increasing exports of non-oil goods to neighbours; and selling more oil to China.
Iran’s leaders say the economy has started growing again as a result. Indeed, the Islamic republic has weathered some of the biggest economic and military threats in recent years, a resilience partly reflected in the World Bank’s latest report.
In its economic forecasts published last week, the international lender said Iran’s economy was “gradually recovering following a lost decade (2011-2020) of negligible economic growth”.
After a two-year contraction, Iran’s gross domestic product grew by 6.2 per cent year on year in the period from March to May, the first quarter of the country’s 2021-22 fiscal year. This was thanks to expansion in oil and services sectors and less stringent Covid-19 restrictions.
Meanwhile, oil production — Iran’s lifeline — is rising: it reached 2.4 mbpd in January-November 2021, although it is still behind the pre-sanction level of 3.8 mbpd in 2017, the bank said.
The positive developments have emboldened Tehran at a time when its diplomats are negotiating with world powers in Vienna to resurrect the 2015 nuclear deal, from which the US under Donald Trump withdrew in 2018. Iran promises it will roll back its huge nuclear advances only if the US lifts all sanctions first and guarantees no other US leader would abandon the deal. Economic resistance would continue if not.
Hardliners in Tehran, who control the Islamic republic’s most powerful bodies, shrug off warnings at home that such a stance could dearly cost the country as well as the regime in the long run.
The World Bank report noted that GDP growth was “from a low base”. It said real GDP in the previous financial year ended in March 2021 stood at the same level as a decade ago “while the country forewent the demographic window of opportunity (a highly educated young population)”. The latest economic rebound “only marginally reduced” the income gap with economies in the Gulf, the report noted.
Written by FT trade specialist Alan Beattie and delivered to your inbox on Mondays, Trade Secrets is the FT’s must-read briefing on the changing face of international trade and globalisation. Sign up here
In Iran, patience is running thin. Iranians say numbers are meaningless when their purchasing power is being eaten away with 43.4 per cent inflation (even though it has started going down). Inflation coupled with high unemployment and fluctuations in the currency and capital markets is fuelling pessimism.
The government’s plans to further cut subsidies on basic commodities and medicine have heightened inflationary fears. Masoud Mir-Kazemi, Iran’s vice-president for budget affairs, said Iran could at most earn a net income of $16bn in petrodollars next financial year, just enough to import basic commodities and pay civil servants. “We are under sanctions and it’s impossible” not to slash subsidies, he said last week.
But for a regime that came to power through street protests, fears of history repeating itself, this time against the Islamic republic, are never far. Demonstrations are no longer sparked by the educated middle class to demand more social and political freedoms. Recent protests have been mostly over economic woes, whether caused by the government or by a severe drought.
Mehdi Asgari, a member of parliament opposing a cut in subsidies, said last week that more than 10m families struggled with poverty “and millions more [were] heading” in that direction. “They no longer can afford meat and rice and now you want to take away their bread and cheese, too?”
About Google Data Analytics Professional Certification | Includes my opinion
22 Rising NFT Artists to Watch in 2022
The gadgets we broke – The Verge
BTC, ETH, BNB, SOL, ADA, XRP, LUNA, DOT, AVAX, DOGE
LG Display’s latest transparent ‘shelf’ OLED can display or augment artworks
The biggest crypto, NFT, digital real estate and metaverse stories of 2021
Is the “uncanny valley” good for a future metaverse?
Top 10 Crypto Metaverse Coins With a Circulating Supply of Over 1 Billion – The VR Soldier